How to repair the food blender?

food blender

Simple maintenance of Food Blender, including maintenance switch, repair speed control and maintenance gear.

Maintenance switch: a simple component of the switch, which can easily stop the operation of small appliances. If your mixer doesn't work, you check the plug and power cord, and Test the switch.

To test and replace the switch:
Step 1: Carefully take out the switch exposed on the back and switch it to the surrounding house.
Step 2: Check the terminals on the switch to ensure that the wires from home appliances are connected to the switch.
Step 3: Mark the terminal line and disconnect it.
Step 4: Use a continuity tester or multimeter to determine if the switch is faulty. If so, replace and reconnect the terminal wires.

Maintenance speed control: The speed of the food mixer is controlled by changing the current motor. The smaller hand mixers/Stand Mixer use high-speed switches, which include an electronic contact that increases the amount of current per motor. The larger units use variable resistors to control the current. Continuity tester or multimeters are used to check two types of speed control operation. In some cases, contacts can be cleaned to improve functionality. However, in many cases, the problems caused by speed control can only be solved by replacing the controller.

Repair gear: Food mixers work so well because they rotate in the opposite direction to mix ingredients. This opposed the rotation of gear production. In most food mixers, the worm gear connected to the motor shaft becomes two or more pinions. In turn, the pinion rotates the agitator. Because the physical components of gears, rather than one of an appliance, serve them differently.